Shed and fence treatment. Gives long lasting decorative protection to rough sawn garden wood.

• Harmless to plants and pets
• 30% greater coverage than creosote
• Six times longer lasting colour than creosote
• Quick Drying
• Water repellent
• Low Odour

Where to use

For use on rough sawn garden wood including wood which has been pre-treated with Creosote or pressure treated. Not suitable for smooth or planed wood, decking or garden furniture. Use a suitable wood preserver for deep penetrating protection against rot and decay, particularly for wood in ground contact. Not suitable for spray application.

Preparing the Job

For best results the wood should be surface dry. Remove dirt, algae, lichen, fungi or moss using a stiff brush. In cases of heavy growth treat with Cuprinol Exterior Fungicide. Allow oily treatments such as Creosote to weather.

How to Apply

Stir well before use. Brush on uniformly to cover wood. One coat is normally sufficient, but two or three may be applied for a deeper colour. Do not apply in temperatures below 5°C or if rain is likely before product is fully dry.

Drying Time

Drying time 2-6 hours, ensure previous coat is dry before re-coating. Note: The drying time will be extended under poor drying conditions.

Cleaning Up

Re-seal container after use. Remove as much product as possible from brushes before washing with water.

Coverage

6 sq.m. per litre (1 coat). Refer to can for full details.