The wall mounted water butt is unique in that it is both attractive and functionally convenient for the storage of precious rain water- the lifeblood of your plants.
Simply fixed to the wall of your house or outbuilding at a convenient height. The old waterbutt concept has been brought right upto date to compliment the exterior appearance of all types of houses.
Fitting all standard round and square down pipes, simple overflow system tops up automatically when it rains and diverts all excess water back into the down pipe. The compact design will fit in the tightest of places and can have a tap fitted either side for easy access.
Space saving slimline design to compliment and fit any style of house
Guaranteed sturdy and easy to install, supplied with everything you need
Totally child safe and pet proof
Made from UV protected Polyethylene with a 3 year guarantee
Measures 48in.(h) x 18in.(w) x 9in.(d) - 122cm(h) x 46cm(w) x 23cm(d)
Save precious natural recources saving you money
Hold 100Ltrs (22Gall) of pure rain water
Fit all round or square UK down pipes
Automatically fill and divert excess water - no other parts required
The wallmounted waterbutt combines both a diverter and a reservoir in one unique product. Excess water overflows automatically and safely into the downpipe and on into your drain. When full and containing 22 galls (100ltrs) natural expansion of the reservoir will occur, both the reservoir and fixings have been designed to accomodate this. In winter drain by fitting a length of hose from the tap (left in the open position) directly into your drain. You may add to the charm of your waterbutt by inserting flower pots into the two top holes, ensure that these do not sit below the overflow point. The higher the waterbutt is placed on the wall the greater the \'head\' of water pressure, thus enabling direct hosing of your plants. More than one butt can be connected together for increased storage capacity. Contents Checklist: 1 Wallmounted Waterbutt 1 Wall bracket 2 10x100 plug and screws 2 10x75 plug and screws 1 Tap 1 Tap bung 2 Top caps Fixing Instructions: Follow these instructions carefully, all brackets and fixings must be used correctly. Step 1: Decide Height Decide the height and position at which you wish to fix the waterbutt, remember to allow enough room for your watering can under the tap. The suggested height is 15" (380mm) at this point mark a level line on the wall A Step 2: Bottom Pipe Clips Any bottom pipe clip must be 5" (100mm) below the waterbutt, if necessary reposition B Step 3: Outlet Section Cuts Measure 42 1/2" (1075mm) up from height line A and cut horizontally through the pipe. Now mark 5 1/2" (140mm) above this cut and once again cut and remove this section C Step 4: Top Pipe Clips Ensure that any top clip is positoned at a minimum of 9 1/2" (240mm) above the top of reservoir D for ease of fitting. Step 5: Fixing Wall Bracket Taking the metal wall bracket E slide down the pipe via the cut section to align the protruding arms with height line A check that the bracket is dead centre of the pipe and that it is level (Use a spirit level). Mark the holes and drill two 10mm holes and using the two short plugs and screws, fix to the wall. Step 6: Fitting the Water Butt Offer up the water butt to the top down pipe sliding it inside the centre hole of the butt until it will go no further. With the butt against the wall, lower it onto the bottom pipe section. Now with butt seated level and evenly on the brackets, mark the position dead centre of the two top holes and REMOVE THE WATERBUTT* to allow for drilling. Drill two 3 1/2 (90mm) deep holes *failure to do this may result in damage to the top area of the reservoir when using the drill Step 7: Fixing the Waterbutt Fit the bung to the side you DO NOT want the tap, in case of limited access when in position. Now repeat step 6. Once again with the butt in place, push the long plugs through the top holes of the butt and fix to the wall. Finally fit the tap and push the top caps into place. |  |
View other similar products in:-
| Height: | 122 cm |
|---|
| Width: | 23 cm |
|---|
| Length: | 46 cm |
|---|
| Volume: | 100 litres |
|---|
| Size: | 100 Litre |
|---|
| Colour: | Black |
|---|
| Manufacturer: | OWMWBC |
|---|
| Model Number: | WALLMOUNTED |
|---|
| Our Code: | OWMWBWALLMOUNTED |
|---|
| CG SKU: | 81554 |
|---|